MIMAKI CG-130FXII, Руководство по эксплуатации

Страница: 45 / 152

– 2.15 –
The sheet width is detected
first, then the sheet length is
detected by feeding the sheet
forward and backward.
The sheet width is detected
first, then the sheet length is
detected by feeding the sheet
forward and backward.
The sheet width is detected
first, then front end of the
sheet is detected.
The sheet width is detected
first, then rear end of the
sheet is detected.
Key
The device detects a sheet of media in the five different methods as shown below.
This side
Origin Origin
This side This side
Origin
Origin
Origin
Detecting
method
Example of
display after the
sheet detection
Key
Detecting
method
Example of
display after the
sheet detection
Only the sheet width is
detected.
A
B
* In the case where the detected dimension is 3 m or more, the display “ **** ”
will appear on the LCD.
• In the case where a long sheet of media is used or a drawn-out sheet is
used from its middle area, the sheet detection will require an extended
period of time. In such a case, the detection time can be reduced by detect-
ing only the sheet width.
A =
****
B = 123 A =
****
B = 123
A =
****
B = 123
A = 567 B = 123
A = 567 B = 123
B B
A
B
B
A roll sheet is loaded
to the rear face of the
device. A leaf sheet is loaded
to the rear face of the
device.
Only the sheet width is
detected.
A roll sheet is loaded
to the front face of the
device. A leaf sheet is loaded
to the front face of the
device.