EC / TDS
43
Messages Displayed During Measurement
y
“OUT OF SPEC” message is displayed when measured parameter and / or temperature
are out of range.
y
“OVER RANGE” message and range value (blinking) is displayed if EC measurement
exceeds the user-selected range.
y
“NO CAL” message indicates that the probe needs to be calibrated or that the previous
calibration has been deleted.
y
If the probe is not connected, “NO PROBE” message is displayed.
Messages Displayed During Interval Logging
y
If EC temperature exceeds the specified limits, “OUT OF SPEC” message is displayed
alternatively with the Log specific messages.
y
If the probe sensor is disconnected or damaged, logging stops and “NO PROBE”
message is displayed on the third LCD line. The log file will indicate “Log end - Probe
disconnected”.
