LOGGING (MW151)
35
Log on Interval
Press RCL then GLP/ACCEPT and use the
keys to scroll between interval lots.
Press LOG/CLEAR to delete lot.
“CLEAR DONE” is displayed for a few seconds after selected lot has been deleted.
pHmV
NO MTC ATC
USB
OPEN
AUTO
HOLD
SLOPE
CLEAR
CAL
1.68
4.01
6.86
7.01
9.18
10.01
12.45
CUST1
CUST2
DATE
ACCEPT
ºC
ºF
pH
mV
TIME
pHmV
NO MTC ATC
USB
OPEN
AUTO
HOLD
SLOPE
CLEAR
CAL
1.68
4.01
6.86
7.01
9.18
10.01
12.45
CUST1
CUST2
DATE
ACCEPT
ºC
ºF
pH
mV
TIME
A lot number is used to identify a particular set of data. Lot numbers are allocated
successively up to 100 even if some lots have been deleted.
If log space is full (100 lots) users need to delete some of them to free up log space. If lot
number has reached 100, users need to delete all lots to restart lot numbering.
Delete All
Press RCL and the total number of logs is displayed. Press LOG/CLEAR to delete all logs.
“CLEAR ALL” will be displayed with “ACCEPT” tag blinking. Press GLP/ACCEPT to confirm
(or press ESC to exit Log recall). “PLEASE WAIT” and the percent cleared will be displayed
until completed.
pHmV
NO MTC ATC
USB
OPEN
AUTO
HOLD
SLOPE
CLEAR
CAL
1.68
4.01
6.86
7.01
9.18
10.01
12.45
CUST1
CUST2
DATE
ACCEPT
ºC
ºF
pH
mV
TIME
pHmV
NO MTC ATC
USB
OPEN
AUTO
HOLD
SLOPE
CLEAR
CAL
1.68
4.01
6.86
7.01
9.18
10.01
12.45
CUST1
CUST2
DATE
ACCEPT
ºC
ºF
pH
mV
TIME
Note:
If LOG/CLEAR was pressed by mistake, press LOG/CLEAR again to exit without
deleting.
