www.milwaukeetesters.com
9
This screen appears each time the meter enters pump or
pH calibration mode by pressing the CAL button. The
meter is ready to start pump calibration by pressing the
PUMP button. The meter returns to the main screen by
pressing the CAL button.
PUMP CALIBRATION MESSAGES
This screen appears while pump calibration is in progress.
Pressing CAL or PUMP button, the minititrator returns
to the main screen.
This screen appears for a few seconds before returning
to the main screen, when pump calibration is done.
The used standard solution is wrong.
This error message appears when the input readings
(mV) exceed the input limits (0
y
1000mV).
This error message appears when the sample
concentration exceeds 400 ppm.
This screen appears each time the meter enters pump or
pH calibration mode by pressing the CAL button.
pH CALIBRATION MESSAGES
This screen appears when the pH calibration is started
by pressing the pH button. Pressing again pH or the
CAL button, the pH calibration is aborted and the
instrument returns to the main screen.
