Instruction Manual Mi456 TITRATABLE TOTAL ACIDITY Minititrator for wine analysis
1 0
1 0
1 0
1 0
1 0
This screen appears each time the minititrator enters
TITRATION mode. Press the START STOP button in order
to stop the titration and return to the main screen.
TITRATION MESSAGES
The titration result, expressed as concentration of tartaric
acid in g/L, is displayed at the end of the titration process.
Press the START STOP button to return to the main screen.
This error message appears when the input reading
(pH, temeprature) exceeds the input limits.
This screen appears when the evaluated concentration
is out of range.
This prompt appears for a few seconds before returning
to the main screen, when the pH calibration is done.
The “WRONG” “ ” / “WRONG” “ ” tags alternatively
blinking appear when the buffer solution is not correct or
when the probe is wrong. Clean the electrode by following
the Cleaning Procedure or check the quality of the buffer
in order to continue the pH calibration.
Press the CAL or pH button to leave pH calibration mode.
pH END POINT SETUP MESSAGES
This screen appears when the meter is in main screen and the
pH button is pressed. Press the CAL button in order to change
the end-point. Each time the pH button is pressed the end point
value is changed and the meter returns to the main screen.
