36
MW160
Bench Meter
y
The instrument identification code
ISE Information
y
Date (MM.DD.YYYY) of the last calibration
y
The slope value in the first LCD line and the offset in the second LCD line
y
The calibration standards in calibration order
y
The nstrument identification code
Notes:
“OLd” message is displayed beneath the ppm value when the standard was not used
during last calibration. Press SETUP to see calibration date and time.
“no BUFFER” message is displayed when only a one-point calibraton was performed.
If a one-point calibration is performed after a two-point calibration, the instrument
keeps the old slope.
