Milwaukee M18 BLCS66, Оригинальное руководство пользователя

Страница: 25 / 141

Deutsch
23
GB
TECHNICAL DATA
Circular saw
M18 BLCS66
Production code 4679 20 01 ...
... 000001-999999
Battery voltage 18 V
No-load speed 5000 min
-1
Saw blade dia. x hole dia 190 x 30 mm
Saw blade thickness 1,6 mm
Blade teeth 24
Max. Cutting depth at 0° / 45° / 50° 66 / 48 / 46 mm
Weight according EPTA-Procedure 01/2003 (Li-Ion 2,0 Ah ... 5,0 Ah) 3,7...4,0 kg
Weight without battery 3,3 Kg
Recommended Ambient Operating Temperature -18°C ... +50°C
Recommended battery types M18B2...M18B5
Recommended charger M1418C6; M12-18...
Noise information
Measured values determined according to EN 60745. Typically, the A-weighted noise levels of the tool are:
Sound pressure level (Uncertainty K=3dB(A))
Sound power level (Uncertainty K=3dB(A))
Wear ear protectors!
83,2 dB(A)
94,2 dB(A)
Vibration information
Vibration total values (triaxial vector sum) determined according to EN 60745
Sawing of wood (Li-Ion 2,0 Ah): Vibration emission value a
h,W
Uncertainty K=
2,0 m/s2
1,5 m/s2
WARNING!
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745
and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications,
with different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over
the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is run-
ning but not actually doing the job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories,
keep the hands warm, organisation of work patterns.
WARNING Read all safety warnings, instructions,
illustrations and specifications provided with this power tool.
Failure to follow the warnings and instructions may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
CIRCULAR SAW SAFETY WARNINGS
Cutting procedures
a) DANGER: Keep hands away from cutting area and
the blade. Keep your second hand on auxiliary handle, or
motor housing.
If both hands are holding the saw, they cannot be
cut by the blade.
b) Do not reach underneath the workpiece. The guard cannot
protect you from the blade below the workpiece.
c) Adjust the cutting depth to the thickness of the work-
piece. Less than a full tooth of the blade teeth should be visible
below the workpiece.
d) Never hold the workpiece in your hands or across
your leg while cutting. Secure the workpiece to a stable
platform. It is important to support the work properly to minimise
body exposure, blade binding, or loss of control.
e) Hold the power tool by insulated gripping surfaces,
when performing an operation where the cutting tool may
contact hidden wiring.
Contact with a „live“ wire will also make
exposed metal parts of the power tool „live“ and could give the
operator an electric shock.
f) When ripping, always use a rip fence or straight edge
guide.
This improves the accuracy of cut and reduces the chance
of blade binding.
g) Always use blades with correct size and shape (diamond
versus round) of arbour holes.
Blades that do not match the
mounting hardware of the saw will run off-centre, causing loss of
control.
English