Milwaukee 6521 Series Скачать руководство пользователя страница 9

page 9

Maintaining Tools

Keep your tool in good repair by adopting a regular maintenance pro-
gram. Before use, examine the general condition of your tool. Inspect
guards, switches, tool cord set and extension cord for damage. Check
for loose screws, misalignment, binding of moving parts, improper mount-
ing, broken parts and any other condition that may affect its safe opera-
tion. If abnormal noise or vibration occurs, turn the tool off immediately
and have the problem corrected before further use. Do not use a dam-
aged tool. Tag damaged tools “DO NOT USE” until repaired
(see “Repairs”).

Under normal conditions, relubrication is not necessary until the motor
brushes need to be replaced. After six months to one year, depending on
use, return your tool to the nearest

 MILWAUKEE service facility for the

following:

Lubrication

Brush inspection and replacement

Mechanical inspection and cleaning (gears, spindles, bearings,
housing, etc.)

Electrical inspection (switch, cord, armature, etc.)

Testing to assure proper mechanical and electrical operation

MAINTENANCE

For a complete listing of accessories refer to your

 MILWAUKEE Electric

Tool catalog or go on-line to www.mil-electric-tool.com. To obtain a cata-
log, contact your local distributor or a service center listed on the back
cover of this operator’s manual.

Quik-Lok

®

 Cord Sets

10' Quik-Lok

®

 Cord Cat. No. 48-76-5010

25' Quik-Lok

®

 Cord Cat. No. 48-76-5025

Select Models:

Blade Clamp Cat. No. 42-68-0682
Blade Clamp Screw Cat. No. 06-83-2975

“787” Blades:

Blade Clamp Cat. No. 42-68-0685
Blade Clamp Screw Cat. No. 06-83-2975

See Pages 24, 25 & 26 for a listing of Super Sawzall

® 

Blades.

ACCESSORIES

Cleaning

Clean dust and debris from vents. Keep the tool handles clean, dry and
free of oil or grease. Use only mild soap and a damp cloth to clean your
tool since certain cleaning agents and solvents are harmful to plastics
and other insulated parts. Some of these include: gasoline, turpentine,
lacquer thinner, paint thinner, chlorinated cleaning solvents, ammonia
and household detergents containing ammonia. Never use flammable or
combustible solvents around tools.

Repairs

If your tool is damaged, return the entire tool to the nearest service
center listed on the back cover of this operator’s manual.

WARNING!

To reduce the risk of injury, always unplug
your tool before performing any maintenance.
Never disassemble the tool or try to do any
rewiring on the tool's electrical system. Contact
a

 MILWAUKEE service facility for ALL repairs.

WARNING!

To reduce the risk of injury, electric shock and
damage to the tool, never immerse your tool in
liquid or allow a liquid to flow inside the tool.

WARNING!

To reduce the risk of injury, always unplug the
tool before attaching or removing accessories.
Use only specifically recommended
accessories. Others may be hazardous.

TWO YEAR TOOL LIMITED WARRANTY

Every 

MILWAUKEE tool is tested before leaving the factory and is war-

ranted to be free from defects in material and workmanship. 

MILWAUKEE

will repair or replace (at 

MILWAUKEE’s discretion), without charge, any

tool (including battery chargers) which examination proves to be defec-
tive in material or workmanship from two (2) years after the date of
purchase. Return the tool and a copy of the purchase receipt or other
proof of purchase to a 

MILWAUKEE Factory Service/Sales Support

Branch location or 

MILWAUKEE Authorized Service Station, freight pre-

paid and insured. This warranty does not cover damage from repairs
made or attempted by other than 

MILWAUKEE authorized personnel,

abuse, normal wear and tear, lack of maintenance, or accidents.

Battery Packs, Flashlights, and Radios are warranted for one (1) year
from the date of purchase.

THE REPAIR AND REPLACEMENT REMEDIES DESCRIBED HEREIN ARE
EXCLUSIVE. IN NO EVENT SHALL 

MILWAUKEE BE LIABLE FOR ANY

INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGES, INCLUDING
LOSS OF PROFITS.

THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRAN-
TIES, OR CONDITIONS, WRITTEN OR ORAL, EXPRESSED OR IMPLIED FOR
MERCHANTABLILITY OR FITNESS FOR PARTICULAR USE OR PURPOSE.

This warranty gives you specific legal rights. You may also have other
rights that vary from state to state and province to province. In those
states that do not allow the exclusion of implied warranties or limitation
of incidental or consequential damages, the above limitations or exclu-
sions may not apply to you. This warranty applies to the United States,
Canada, and Mexico only.

Содержание 6521 Series





























Отзывы: