Milwaukee 4000474126, Оригинальное руководство пользователя, Страница: 26 / 140

26
M18 FNCS18GS
.........4770 95 01
...000001-999999
.................0 °
............1,02 mm
......9,5/38,1 mm
.............108
.................3 /sec.
...............18 V
2,8 kg ... 4,0 kg
... -18°C ... +50 °C
.. M18B...M18HB...
M12-18 C...M1418 C6
............80,8 dB (A)
............91,8 dB (A)
............2,21 m/s
2
..............1,5 m/s 2
ENGLISH
TECHNICAL DATA CORDLESS STAPLER
Production code........................................................................................
Collation angle ..........................................................................................
Fastener type: brad
Diameter ................................................................................................
Length min./max. ...................................................................................
Magazine capacity (number of nails) ........................................................
Cycle rate .................................................................................................
Battery voltage..........................................................................................
Weight according EPTA-Procedure 01/2014 (2.0 Ah ... 12.0 Ah) .............
Recommended ambient operating temperature .......................................
Recommended battery types....................................................................
Recommended charger ............................................................................
Noise/vibration information
Measured values determined according to EN 60 745.
Typically, the A-weighted noise levels of the tool are:
Sound pressure level (Uncertainty K=3dB(A)) .........................................
Sound power level (Uncertainty K=3dB(A)) ..............................................
Wear ear protectors!
Total vibration values (vector sum in the three axes) determined
according to EN 60 745.
Vibration emission value a
h
...................................................................
Uncertainty K= .......................................................................................
WARNING Read all safety warnings, instructions,
illustrations and speci fi cations provided with this power tool.
Failure to follow all instructions listed below may result in electric
shock, fi re and/or serious injury.
Save all warnings and instructions for future reference.
CORDLESS STAPLER SAFETY WARNINGS
Always assume that the tool contains fasteners. Careless
handling of the stapler can result in unexpected fi ring of fasteners
and personal injury.
Do not point the tool towards yourself or anyone nearby.
Unexpected triggering will discharge the fastener causing an injury.
Do not actuate the tool unless the tool is placed fi rmly against
the workpiece. If the tool is not in contact with the workpiece, the
fastener may be de fl ected away from your target.
Disconnect the tool from the power source when the fastener
jams in the tool. While removing a jammed fastener, the stapler
may be accidentally activated if it is plugged in.
Use caution while removing a jammed fastener. The
mechanism may be under compression and the fastener may be
forcefully discharged while attempting to free a jammed condition.
Do not use this stapler for fastening electrical cables. It is not
designed for electric cable installation and may damage the
insulation of electric cables thereby causing electric shock or fi re
hazards.
Wear ear protectors. Exposure to noise can cause hearing loss.
Hold power tool by insulated gripping surfaces, when
performing an operation where the nail may contact hidden
wiring. Nails contacting a “live” wire may make exposed metal
parts of the power tool “live” and could give the operator an electric
shock.
Always wear eye protection with side shields. Everyday
glasses have only impact resistant lenses. They are not safety
glasses. Following this rule will reduce the risk of serious personal
injury.
Eye protection provides protection against fl ying particles
both from the FRONT and SIDE should ALWAYS be worn by
the operator and others in the work area when loading,
operating or servicing this tool . Eye protection is required to
guard against fl ying fasteners and debris, which could cause
severe eye injury.
Always remove the battery before adjusting the depth of drive
wheel.
Do not pull back on the adjustment wheel, the wheel is designed to
be rotated.
Do not press the trigger while adjusting the depth of drive wheel.
Always select full sequential fi ring mode before adjusting the depth
of drive.
Do not point the tool towards yourself or anyone nearby when
adjusting the depth of drive.
ADDITIONAL SAFETY INSTRUCTIONS
Always be aware that misuse and improper handling of this tool
can cause injury to yourself and others.
The tool is designed for single-hand use. Do not hold the tool by
the front of the magazine. Do not put hands, head, or other parts of
your body near the bottom of the magazine where the nail exits the
tool, as serious personal injury could be caused.
Always ensure that the workpiece contact is fully positioned above
the workpiece. Positioning the workpiece contact only partially
above the workpiece could cause the nail to miss the workpiece
completely and result in serious personal injury.
Do not drive nails near edge of material. The workpiece may split
causing the nail to ricochet, injuring you or a coworker. Be aware
that the nail may follow the grain of the wood, causing it to protrude
unexpectedly from the side of the work material or de fl ect, possibly
causing injury.
WARNING
The vibration and noise emission level given in this information sheet has been measured in accordance with a standardized test given in
EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration and noise emission level represents the main applications of the tool. However if the tool is used for di
ff erent
applications, with di ff erent accessories or poorly maintained, the vibration and noise emission may di ff er. This may signi fi cantly increase the
exposure level over the total working period.
An estimation of the level of exposure to vibration and noise should also take into account the times when the tool is switched o
ff or when it
is running but not actually doing the job. This may signi fi cantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the e ff ects of vibration and noise such as: maintain the tool and the
accessories, keep the hands warm, organization of work patterns.
470 328 - M18FNCS18G.indd 26 470 328 - M18FNCS18G.indd 26 09.03.2020 20:10:02 09.03.2020 20:10:02