background image

 

 

 

Sterylis  BASIC MANUAL                                                                                                                                                                            

  

| 5

 

 

3.

 

Important safety instructions 

There are several warning stickers on the housing of the device, the contents of which are also presented below.  It is 
imperative that you comply with them! Failure to comply with the information contained therein may lead to a risk to the 
health or life of the user or other persons, animals and living organisms, and may lead to the failure of the device. 

 

 

 

 
High  voltage  inside  the  device  is  dangerous  to  human  health.  In  case  of  electric  shock  with  the  parameters as  in  the 
device, skin burns, muscle spasms, loss of consciousness and, in extreme cases, cardiac arrest can occur. Therefore,  all 
service work may only start after the unit has been disconnected from the power supply and may only be carried out by 
qualified and properly trained personnel! 
In the event of an electric shock, isolate the victim from the power source as soon as possible - turn off the fuses and then 
unplug the plug from the electrical outlet. The second, but more risky way is to pull the victim away from the power source 
with a wooden stick. Call an ambulance as soon as possible after the victim is isolated from the power supply. If the victim 
is unconscious but breathing, circulation is maintained and spinal injury can be ruled out, the spine should be placed in a 
lateral  fixed  position.  If  the  victim  is  not  breathing,  artificial  respiration  must  be  performed  and,  if  necessary,  a  heart 
massage. If the victim has symptoms of concussion (pale, cold skin, sweat, chills, accelerated heart rate), place them in an 
anti-shock position - on their back, with their legs raised. 

 

 

 

Despite a specially designed disinfection channel and limiting switch protection (removing any of the air filters disconnects 
the fluorescent lamps), there is always a minimal risk of UV-C radiation escaping outside the device due to improper use 
of the product or the occurrence of an unforeseeable failure by the manufacturer.  It is therefore necessary to read the 
following information on the possible effects of UV-C exposure, first aid measures and protective equipment! 
Fluorescent lamps inside the device emit UV-C radiation, which can cause negative effects on skin and eyes. The effects of 
radiation exposure depend on the wavelength, the amount of radiation absorbed and the type of tissue exposed. The most 
common symptom of skin exposure to this type of radiation is erythema (redness). The degree of redness and its course 
depend on the size of the radiation and the wavelength of the radiation. A high dose of UV-C radiation can lead to skin 
burns,  which  are  manifested  by  painful  swellings  and  blisters.  Long-term  exposure  to  radiation  leads  to unfavourable 
changes in the epidermis: it accelerates the skin aging process and causes pre-cancer and neoplastic changes. Repeated 
exposure of the skin to radiation, particularly high intensity, can cause excessive keratinization, which is a contributor to 
the formation of cancers such as basal and squamous cell carcinoma and melanoma. UV-C radiation absorbed by the skin 
can cause inflammation of the  cornea, conjunctivitis, damage to the retina and cornea and can lead to photochemical 

Содержание STERYLIS BASIC-100


























Отзывы:

Похожие инструкции для STERYLIS BASIC-100