Sterylis BASIC MANUAL
| 17
When the AUTO-TEST function is active, the mode lights and tESt on the display in the AUTOMATIC MODE section blink
quickly.
To interrupt the AUTO-TEST function, press any of the START buttons corresponding to filtration, silent disinfection,
standard disinfection or automatic disinfection modes.
When the AUTO-TEST function is completed, the unit will go into standby mode.
6.7.2 SET-TIME function
The function is used to set the current time on the controller. When the SET-TIME function is selected, the number active
on the display in the TIMER section flashes.
To set the current time:
The + and - buttons change the value by 1 active digit. The selection of the active digit is made by pressing the OK button
in the TIMER section. The time is saved immediately after changing any number, no additional approval is required.
To return to the standby mode, press any of the START or OK buttons in the AUTOMATIC MODE section.
