Millipore DDHW00010-WW, Руководство пользователя

Страница: 8 / 51

Direct Detect® Spectrometer User Guide 4
5
Safety Precautions
Review and understand the safety precautions below before installing and operating the Direct Detect®
spectrometer.
Y
WARNING
● To avoid danger of electric shock, do not install the instrument in an area with a high humidity
level. Refer to Site Requirements in section 6.2.
● Do not touch the Ethernet cable or universal power adapter plugs with wet hands.
● To avoid potential shock hazard, choose the correct plug configuration and make sure that the
power adapter is plugged securely into a properly grounded AC power outlet. Make sure that
the connection between the cable and the instrument is secure.
● Always ensure that the power supply input voltage matches the voltage available in your
location.
● Use only the power supplies that were supplied by EMD Millipore Corporation for use with the
Direct Detect® system. Use of other power supplies may damage the system.
● Minimize power draw from other instruments on the same power circuit.
● Do not use with flammable or explosive liquids. Cards that have been spotted with samples in
flammable solvents must be dried prior to insertion into the instrument.
6
Installation
NOTE:
For a full installation, operation, and process qualification protocol and checklist, refer to
section 14.
6.1 Packaging
Inspect the packaging for damage upon receipt. If there are any signs of damage, contact
the responsible shipping company.
Y
WARNING: Do not put a spectrometer showing signs of damage into operation as this
may result in severe personal injuries and/or property damage.
Keep the original shipping boxes in case you need to return the spectrometer for servicing
or repair.
NOTE:
Instruments will not be accepted for repair if not in original packaging. EMD
Millipore Corporation will provide shipping boxes for a charge if original packaging
has been discarded.