Milli-Q EQ 7000, Руководство пользователя

Страница: 5 / 34

Introduction
3
The Q-POD dispenser is detachable from its support. Its dispensing ‘wheel’ delivers water at 3
different flows: Low - Medium - High, up 2 L/min.
At the outlet of the dispenser, the final purification is performed by the application-specific POD-
Pak. The large 7” touchscreen on the HMI offers a wide range of applications for users. It also
has a USB port to easily export data.
Note: High flow reaches above 2L/min when attached to a pressurized loop
When not in active use, the water within the system will recirculate for three minutes every hour.
This is to maintain a clean environment and to avoid contamination. The system should not be
turned off as this will stop the periodic recirculation taking place.
System flow schematics
The system can be fed either by a pressurized loop or a storage tank.
1 Inlet strainer 9 Strainer
2 Inlet valve 10 UV lamp 185mm
3 Feed Conductivity Cell (option) 11 Intermediate resistivity cell
4 Internal Pressure Regulator (option) 12 IPAK Quanta
®
Cartridge
5 Pressure Sensor 13 Product resistivity cell
6 Pump 14 Point Of Dispense (POD)
7 3-way valve 15 Recirculation valve
8 IPAK Meta
®
cartridge
1 2 3 4 5
6
7
8
9 10
11
12
13
14
15