Milli-Q EQ 7000, Руководство пользователя

Страница: 33 / 34

31
LEGAL INFORMATION & WARRANTY
It has always been Millipore SAS policy to continuously improve its products.
The information in this document is subject to change without notice and should not be construed
as a commitment by Millipore SAS. Millipore SAS assumes no responsibility for any errors that
might appear in this document. This user manual is believed to be complete and accurate at
the time of publication. In no event shall Millipore SAS be liable for incidental or consequential
damages in connection with or arising from the use of this user manual.
Product warranty and limitation of liability
The applicable warranty and limitation of liability for the products listed in this publication may
be found at www.merckmillipore.com or www.emdmillipore.com within the “Conditions of Sale”
applicable to your purchase transaction.
Copyright
© Millipore SAS 2016.
All rights reserved. This document or parts thereof may not be reproduced in any form without
the written permission of Millipore SAS.
The photographs illustrating the products are non-contractual.
Trademarks
The initial M, Millipore, Milli-Q, Q-POD, IPAK Meta, IPAK Quanta, Jetpore, IQnano, Millipak,
Biopak, EDS-Pak, VOC-Pak and LC-Pak are trademarks of Merck KGaA, Darmstadt, Germany.
Millipore SAS is an affiliate of Merck KGaA, Darmstadt, Germany.
All other trademarks are trademarks of their respective manufacturers.
The Life Science Business of Merck KGaA, Darmstadt, Germany operates as MilliporeSigma in
the US and Canada.
Safety information: Please refer to Safety Addendum
Your Milli-Q system should be operated according to the instructions in this user manual. In
particular, the hydraulic and electrical specifications should be followed and met. It is important
to use this equipment as specified in this manual; using this equipment in a different manner
may impair the safety precautions of the Milli-Q System.
Never open the system, even when the power switch has been switched off. Hazardous voltage
is present with a hazard of electrical arc flash. Will cause death or serious injury. It is not
sufficient to stop all power to system, the plug must be physically removed from its power
source. Installation and maintenance should only be done by a qualified person. Appropriate
personal protective equipment (PPE) must be worn and safe work practices must be followed.
Document Reference: MILLI-Q_EQ_7000_User_Manual
Revision: V1.0