Miller Robotic Interface II, Руководство пользователя

Страница: 28 / 78

OM-172 324 Page 22
SECTION 8 – TEACHING A MIG WELDING PROGRAM
WARNING
ELECTRIC SHOCK can kill.
•
Do not touch live electrical parts.
•
Control circuit and interface operational power are
On when using or changing the microprocessor
settings.
WELDING WIRE can cause puncture
wounds.
•
Do not point gun towards any part of the body, other
people, or any metal when programming.
The welding wire can be electrically live and move out of
the gun when programming.
Ref. S-0271
Preflow Time
Wire Speed
Weld
Start
Start
Speed
Start Time
W
eld Speed
Weld Time
Crater Speed
Crater Time
Postflow Time
Burnback Time
Time
Weld
Stop
Arc
Start
Arc
Out
Figure 8-1. Weld Cycle
The type of robot being used is defined during the setup process (see Section 10).
The Robot type indicates which parts of the weld cycle the robot controls.
When the Robot type selected is Control of Power Source, Wire, Gas, & Analog,
only the start time, level, and speed are programmable.
When the Robot type selected is Control of Arc On & Analog Inputs, preflow; start
time, level, and speed; burnback time and level; and postflow are programmable.
When the Robot type selected is Arc On & No Analog Inputs, preflow; start time,
level, and speed; weld level and speed; crater time, level, and speed; burnback
time and level; and postflow are programmable.
NOTE