Miller EnPak Mechanic OM-240 113H, Руководство пользователя

Страница: 43 / 90

OM-240 113 Page 39
SECTION 10 − AUTHORIZED DEALER INSTALLATION
INFORMATION
10-1. Serial Number And Rating Label Location
The serial number and rating information for this product is located on the service side base. Use rating label to determine rated output. For future
reference, write serial number in space provided on back cover of this manual.
!
Do not move or operate unit
where it could tip.
!
Always securely fasten unit
onto transport vehicle and
comply with all DOT and other
applicable codes.
NOTICE − Do not install unit where
air flow is restricted or engine may
overheat.
.
See Section 10-3 for mounting
information. See Section 4-5 for
dimensions.
1 Hydraulic Reservoir (Models
With Hydraulic Power Source)
2 EnPak
Typical hydraulic reservoir place-
ment in relation to EnPak. See Sec-
tion 11-1 for complete reservoir re-
quirements.
Ref: install3 2008-01 − 805 454-A / 805 442-A
Movement
10-2. Installing Unit
OR
Location/Airflow Clearance
1 in.
(25 mm)
7 in. (178 mm) Mainten-
ance
4 in. (102 mm) Operation
18 in.
(460 mm)
1 in.
(25 mm)
1
2
1
2
7 in. (178 mm) Mainten-
ance
4 in. (102 mm) Operation
!
Hot air.
!
Hot air.
!
Hot air.