Miller 301390, Быстрая настройка, Страница: 4 / 12

ArcReach
®
Heater
4
Step 03.
Attach the Insulation Fault
Detection magnet.
To operate properly, the magnet
MUST
be in
contact with bare metal (free of rust, paint, grease, etc.)
a. Connect the work cable to the “Work” cable plug
on the ArcReach Heater extension cable.
b.
To connect plug, align the key with the keyway,
insert its end into the receptacle and rotate
the plug until tight.
c.
Use handle to place the magnet on
the workpiece.
NOTE:
1. ArcReach Heater extension cable
2. ArcReach Heater series adapter
3. Work cable plug
4. Work receptacle 5. Handle
6. Magnet
7. Workpiece
6
5
7
4
1
2
3
7