Miller Electric Snap Start II, Руководство пользователя

Страница: 15 / 28

OM-629 Page 11
3-3. Remote 14 Connections
ST-800 293 / ST-145 666-C / ST-801 480
1 Remote 14 Receptacle
Use to make connection to remote
control device.
2 Remote 14 Plug
Use to make connection to welding
power source Remote 14
receptacle.
OR
1
2
3-4. Remote 14 Receptacle Information
Pin* Pin Information
A 24 volts ac.
B Contact closure to A completes 24 volts ac contactor control circuit.
A J
B
K
I
C +10 volts dc output to remote control.
C
L
N H
D Remote control circuit common.
D
M
G
E
F
E 0 to +10 volts dc input command signal from remote control.
E
K Circuit common
*The remaining pins are not used.
3-5. Remote 14 Plug Information
Pin* Pin Information
A +15 volts dc input from welding power source.
A J
B Contact closure to A com15 volts dc contactor control circuit.
A J
B
K
I
C +10 volts dc input from welding power source.
C
L
N H
D Remote control circuit common.
D
M
G
E
F
E 0 to +10 volts dc command signal from remote control to welding power source.
K Circuit common
*The remaining pins are not used.