46
3.5.2.2 MAC-Address-Based Access Control
Fig. 49. MAC-address-based access control settings.
With
MAC-Address-Based Access Control
, you can specify the wireless client com-
puters that are permitted or not permitted to associate with the AP. When the table type
is set to
inclusive
, entries in the table are permitted to associate with the AP. When the
table type is set to
exclusive
, entries in the table are not permitted to associate with the
AP.
To deny wireless clients’ access to the wireless network:
1. Select
Enabled
from the
Functionality
drop-down list.
2. Set
the
Access control type
to
exclusive
.
3. Specify the MAC address of a wireless client to be denied access, and then click
Add
.
4. Repeat Steps 3 for other wireless clients.
To grant wireless clients’ access to the wireless network:
1. Select
Enabled
from the
Functionality
drop-down list.
2. Set
the
Access control type
to
inclusive
.
3. Specify the MAC address of a wireless client to be denied access, and then click
Add
.
4. Repeat Steps 3 for other wireless clients.
To delete an entry in the access control table:
•
Click
Delete
next to the entry.
NOTE:
The size of the access control table is 64.
