28
3.3.3.2 Backing up and Restoring Configuration Settings by HTTP
Fig. 24. Firmware backup by HTTP.
To back up configuration of the AP by HTTP:
1. Click
Back Up
.
2. You’ll be prompted to open or save the configuration file. Click
Save
.
3. The configuration file is named by the AP’s MAC address. For example, if the AP’s
MAC address is 00-01-02-33-44-55, the configuration backup file should be
“000102334455.hex”. Don’t change the configuration file name in the
Save As
dia-
log box. Select a folder in which the configuration file is to be stored. And then, click
Save
.
NOTE:
The procedure may be a little different with different Web browsers.
Fig. 25. Configuration restore by HTTP.
To restore configuration of the AP by HTTP:
1. Click
Browse
and then select a correct configuration
.hex
file. You have to make
sure the file name is the AP’s MAC address. The firmware file path will be shown in
the
Firmware file name
text box.
2. Click
Restore
to upload the configuration file to the AP.
