MikroKopter OktoXL, Инструкция по эксплуатации

Страница: 8 / 74

Control
An ARF-MikroKopter is easy to fly. But it takes practice and time to be able to control the Kopter safely. The pilot must
also be able to fly the Kopter in any situation without aids such as the GPS-System.
The Kopter is controlled by a RC-transmitter. The Throttle, Yaw,
Roll and Nick functions can be controlled by the sticks.
•
Throttle
◦
Controls the speed of the motors (up/down)
•
Yaw
◦
Turns the Kopter around
•
Nick
◦
Flies forward or back
•
Roll
◦
Flies left or right
(Example: Mode2)
Ideally the ARF-MikroKopter can stay on position with no wind.
Info: P lease leave the trim of the transmitter always in middle position (off)
Via the switches, buttons and potentiometer of the transmitter further functions
like e.g. the automatic hold of the actual position (PositionHold), an automatic
back-flight to the start point (ComingHome) or non-directional flying (CareFree) can be used.
For this purpose the mounted GPS-System and the compass-sensor is used. The GPS system consists of the MK-GPS
and NaviCtrl. The compass sensor is installed on the NaviCtrl.
The functions are further described in „Functions / Flight modes“ Page 37.
Page 4 HiSystems GmbH