MikroKopter OktoXL, Инструкция по эксплуатации

Страница: 20 / 74

Final Assembly ARF-OktoXL 6S12
First at all the landing gear, the battery holder, the propellers and a suitable receiver need to be assembled.
For the first start-up the propellers should not be mounted.
An assembly of the propellers can be done just before the first flight (see page 21).
For the assembly you need the following tools:
•
Phillips screwdriver (Size PH1)
•
Screwdriver
•
Ring spanner (SW 8)
Mounting the battery holder
The battery holder is composed of multiple components which can be
easily assembled.
First the narrow hook-tape need to be threaded into the top plate.
Important: The soft side needs to face upwards.
The second self-adhesive hook-tape need to be applied to the lower plate
as shown in the diagram.
Once this is done, the top and bottom plate with the 18 Aluminium
spacers, 4 rubber bumpers, 5 plastic screws and 9 plastic nuts can be
assembled.
Page 16 HiSystems GmbH
info info