32
UNI-DS3 Development System
MikroElektronika
page
)LJXUH
23-2
: PIC MCU card placed into the DIMM-168p socket
)LJXUH
: MCU card with a PIC microcontroller
Microcontroller in TQFP80 package
Built-in
3,&ÀDVK
programmer
0&8&DUGZLWK3,&0LFURFRQWUROOHULQ74)33DFNDJH
The MCU card is provided with the PIC18F8520 microcontroller in 80-pin TQFP package. In addition to this microcontroller, there is
also a built-in programmer
3,&ÀDVK
with mikroICD support provided on the MCU card. To enable the
3,&ÀDVK
programmer to operate
SURSHUO\LWLVQHFHVVDU\WRLQVWDOOWKHDSSURSULDWH86%GULYHU3ODFHWKH0&8FDUGLQWRWKH',00SVRFNHW¿UVWDQGWKHQIROORZ
the instructions provided in the relevant manual and install driver for the
3,&ÀDVK
programmer from the product CD. To enable a .hex
code to be loaded into a PIC microcontroller, it is necessary to install the
3,&ÀDVK
program. The
3,&ÀDVK
programmer has a hardware
mikroICD support which enables real-time debugging. As a result, it is possible to monitor variables and state of all registers within the
microcontroller during programming.
