20
UNI-DS3 Development System
MikroElektronika
page
16.0. 2x16
/&''LVSOD\
The
UNI-DS3
development system provides an on-board connector for the alphanumeric 2x16 LCD display. This connector is linked
to the microcontroller via pins D0, D1, D4, D5, D6 and D7 on the MCU card. Potentiometer P2 is used for display contrast adjustment.
The display backlight is automatically turned on by turning the development system on.
Communication between the LCD display and the microcontroller is performed in a 4-bit mode. Alphanumeric digits are displayed in
two lines each containing up to 16 characters of 7x5 pixels.
)LJXUH
Alphanumeric 2x16 LCD display connection schematic
)LJXUH
: Alphanumeric LCD display connector
)LJXUH
: Alphanumeric 2x16 LCD display
/&'GLVSOD\EDFNOLJKWLVDXWRPDWLFDOO\WXUQHGRQDORQJZLWKWKHGHYHORSPHQWV\VWHP
Contrast adjustment
potentiometer
