28
UNI-DS3 Development System
MikroElektronika
page
)LJXUH
: dsPIC MCU card placed into the DIMM-168p socket
)LJXUH
: MCU card with a dsPIC the microcontroller
Microcontroller in TQFP80 package
Built-in
GV3,&SURJ
programmer
0&8&DUGZLWKGV3,&0LFURFRQWUROOHU
The MCU card is provided with the dsPIC6014A microcontroller in 80-pin TQFP package. In addition to this microcontroller, there
is also a built-in programmer
GV3,&SURJ
provided on the MCU card. To enable the
GV3,&SURJ
programmer to operate properly, it is
QHFHVVDU\WRLQVWDOOWKHDSSURSULDWH86%GULYHU3ODFHWKH0&8FDUGLQWRWKH',00SVRFNHW¿UVWDQGWKHQIROORZWKHLQVWUXFWLRQV
provided in the relevant manual and install driver for the
GV3,&SURJ
programmer from the product CD. To enable a .hex code to be
loaded into a dsPIC microcontroller, it is necessary to install the
GV3,&ÀDVK
program. The
GV3,&SURJ
programmer has a hardware
mikroICD support which enables real-time debugging. As a result, it is possible to monitor variables and state of all registers within the
microcontroller during programming.
