24
UNI-DS3 Development System
MikroElektronika
page
0&8&DUGZLWK0LFURFRQWUROOHU
The MCU card is provided with a socket for 8051 microcontrollers in DIP40 package. The AT89S8253 microcontroller normally delivered
with the 8051 MCU card is placed into the DIP40 socket. In addition to this microcontroller, there are also other microcontrollers in
DIP40 package such as AT89S51, AT89S52, AT89S53 and AT89S8252 that can be used here.
There is an on-board programmer
8051prog
provided on the MCU card. To enable the proper operation of this programmer,
LW LV QHFHVVDU\ WR LQVWDOO WKH DSSURSULDWH 86% GULYHU 3ODFH WKH 0&8 FDUG LQWR WKH ',00S VRFNHW ¿UVW DQG WKHQ IROORZ WKH
instructions provided in the relevant manual and install driver for the
8051prog
programmer from the product CD. To enable a .hex
code to be loaded into an 8051 microcontroller, it is necessary to install the
ÀDVK
program providing an interface between the
microcontroller and a PC.
)LJXUH
: 8051 MCU card placed in the DIMM-168p socket
)LJXUH
: MCU card with an 8051 microcontroller
Microcontroller in DIP40 package
On-board
8051prog
programmer
