Mikroe CODEGRIP FOR PIC, Руководство пользователя

Страница: 40 / 44

P A G E 40
C O D E G R I P f o r P I C M C U s U S E R M A N U A L
TROUBLESHOO
TING
Error Messages Troubleshooting
Target is not detected (DETECT)
Make sure that the selected MCU matches the MCU connected to the
CODEGRIP device.
Connecting to target failed
Check that the selected interface (ICSP/EJTAG) matches the program
lines on the board.
Try to communicate at a lower speed.
Selected chip not recognized (All buttons except DETECT)
Make sure that the selected MCU matches the MCU connected to the
CODEGRIP device.
File not verified
The content in the MCU flash differs from the contents of the source file.
Make sure the MCU is not read-protected.WW
Operation failed (VERIFY, READ)
Check the communication with the CODEGRIP device and the connection
between the CODEGRIP device and the MCU.
Disconnect from target failed
CODEGRIP Suite lost the connection to the CODEGRIP device before the
operation was completed.
Interface to target currently being used Make sure there is no Debug process in progress.
Your board doesn’t support selected vendor Make sure your MCU card is compatible with the development board.
6. Troubleshooting
6.1 Target programming errors