a. Scroll in programming mode until ”EnEr rSt“ is displayed using the UP or the DOWN button.
b. Press the NEXT button. The “PROG” symbol will blink. Use the UP or DOWN button to toggle “yES” or “no”
symbols.
c. To abort clearing energy register values, select “no”. To clear all energy values select “yES”.
d. Press the NEXT button to confirm the new setting.
e. To proceed next setting press DOWN button.
f. To exit programming mode, press the PROG button. The user will be prompted to confirm the saving of
settings if change is made. Refer Section 6.16.
a. Scroll in programming mode until ”dMd rSt“ is displayed using the UP or the DOWN button.
b. Press the NEXT button. The “PROG” symbol will blink. Use the UP or DOWN button to toggle “yES” or “no”
symbols.
c. To abort clearing demand register, select “no”. To clear all demand register select “yES”.
d. Press the NEXT button to confirm the new setting.
e. To proceed next setting, press DOWN button.
f. To exit programming mode, press the PROG button. The user will be prompted to confirm the saving of
settings if change is made. Refer Section 6.16.
