Mikado VBAR, Руководство пользователя

Страница: 30 / 34

30
- Flying
The default settings in the V-Bar System are such that it the model
with will behave much similar to a model with a flybar and paddles. If
you do not modify the settings for elevator, aileron or rudder, you
should not expect any surprises. We call this setting a "balanced
system setting“.
Sometimes it may appear that on lift-off the heli "overreacts". This is
due to the fact that the control functions are not working for als long
as the heli is not up in the air.
16. Rotorhead Set-up
If you do not want to use a Mikado rotor head in your helicopter, you
need to check a few mechanical points in the rotor head, before using
the VBar.
1) The blade holders must be installed such that the likages run exactly
parallel to the center axis of the rotor shaft. (See picture below.) If the
arms of the blade holders are not long enough, you can make them
longer using distance bolts or washers. The distance between the
center of the main rotor shaft and the ball at the bladeholder should
be 30 mm.
2) The dampening in the rotor head has a great effect on the flight
properties of a VBar rotor head. It is advisable that the rotor head
dampening is adjustable, should this become necessary.