Mikado VBAR, Руководство пользователя

Страница: 20 / 34

20
Step 4. Settting up the Swashplate
The swashplate in a model helicopters normally moves upward on
pitch positive. The same has been implemented in the universal
Presets.
It is also possible for you to choose the direction of swashplate travel.
If it is necessary that your swashplate moves downward on positive
pitch, simply set the check-mark at the box of for collective reverse.
You can do so by clicking on the little blue doctors hat in step 4 of the
set up menu.
In setup mode all servos are decoupled from control. This enables
mechanical adjustments because the control loop is rendered inactive.
Now set all sticks to center position.
Mount the servo arms as close to a 90° angle to the casing or control
rods. The direction of the servo’s collective pitch movement is set
using servo reverse in step 4 on your screen.
After the direction of collective pitch has been set correctly, the
directions of elevator and aileron should also be correct. If this is not
the case, please re-check the servo assignments on your VBar.
Now fine-adjust the servo arms to an exact 90-degree angle using the
control buttons in Step 5 on your screen.