27
13. Parameter Optimization
Different flight parameters, such as choice of main rotor blades, rpm,
Agility-Setting, style of flying require different reactions of the control
loop.
VBar 4.0 adapts to these flight parameters continuously.
Control loop optimization runs as a background task on VBar,
continuously optimizing the parameters on the cyclic axis.
The system needs a few flights to adapt to these parameters.
When you feel the flight behavior is just right, you can disable „optimize“
by unchecking the box to preserve the current state.
14. Control Panel
The VBar Control Panel contains the set-up menu for the pre-installed
setups as well as for the Expert software. The menus are structured
very similar to how it is done in the PC software. An exact description
of the menu structure is included with the control panel.
To activate bank switching, choose Bank Selection Bank 0/1/2/3 in
the VBar sofware. Please do not forget to copy your current set-up to
all the other banks so you have a basic setup on all of them. The
status bar „AUX“ in the „live display“ shows the currently active bank.
During a trim flight, you can do Autotrim on all banks available. Let
the heil perform a 1-to-2-minute hover in each bank. Then land, move
the collective stick to zero pitch and turn off autotrim.
Содержание VBAR
Страница 1: ...Manual V4 05 VBar...