Personnel:
n
Trainer
1.
Spread out the opened i-body
®
and the i-body
®
straps flex on
a level surface for moistening.
2.
Moisten the electrode surfaces evenly using the pump spray
bottle filled with water for a minimum of 3 seconds per elec-
trode.
Risk of fatal injury from improper exposure of the electrodes
to moisture!
– When moistening and putting on the electrodes, ensure
that there is a sufficient distance to the control unit. No
water must penetrate the case.
There is a risk of fatal injury due to electrocution in the event
of liquid penetrating the case of the control unit!
Do not use distilled water. Do not exceed a water temperature of
+86 °F. Only fill the pump spray bottle up to the max. marking
visible on the side. Otherwise, no pressure can be built up. Pump
air into the bottle by moving the pumping piston up and down
Moistening instructions
Fig. 33: Pump spray bottle
L
DANGER
Before the training
2021-07-28
miha-bodytec m.ove EMS training device
75