11.
Once the data has been restored/imported successfully, it
is necessary to restart the device.
Press the on/off switch on the rear of the device.
ð
The device is switched off.
12.
Remove the miha bodytec USB flash drive.
13.
Close the service cover with the help of a screwdriver.
14.
Press the on/off switch on the rear of the device.
ð
The device starts up. The data has been restored.
7.9 Installing updates
Risk of injury due to data errors caused by computer viruses!
– Only use the specified download paths for update files pro-
vided in the miha bodytec newsletter.
– Only use computers with updated anti-virus software when
handling update files
– Before copying the update file to the miha bodytec USB
flash drive, scan the computer for viruses.
Computer viruses can change the update files. This can result
in errors in the control unit that affect the electrical outputs.
Interrupting the update process can cause material damage!
– Do not disconnect the power supply during an update.
– Do not switch off the device during an update.
– Wait for the update to finish and do not input anything.
The device can be permanently damaged if it is turned off
during the update process or if the power supply is inter-
rupted.
If the update is interrupted due to an interruption of power, contact
“Customer service” on page 16).
miha bodytec can send important updates by mail on a miha
bodytec USB flash drive. Important updates must be installed
immediately.
Data errors due to computer
viruses
L
WARNING
Interruption of the update process
NOTICE
How do I receive an update file?
Customization and setup
2021-07-28
miha-bodytec m.ove EMS training device
69