To ensure that the trainer and athletes can communicate as speci-
fied, the managed devices must be oriented towards the master
device so that the trainer can monitor each athlete. A maximum of
2 athletes per trainer are recommended to ensure that training with
synchronized start is effective and safe.
2 steps are required to set up synchronized start:
n
Setting up the master device
“Setting up the master device”
n
Setting up managed devices
You can set the following parameters in the
“Synchronized start”
menu:
n
Synchronized start:
Enables or disables the synchronized start
option in general (if synchronized start is enabled, the synchron-
ized start symbol lights up blue).
n
Master device:
Specifies whether the device is supposed to
control the training as the master device or participate in the
training as a managed device.
n
Group number:
Defines a group number for the training ses-
sion.
n
Countdown:
Specifies the delay with which the training session
will begin following the start command.
n
Flexible training:
When the flexible training option is activated,
all participating devices only have to be set to the same cycle
(e.g., 4 s of pulse and 4 s of pause). In addition, the users of all
devices must train using a training plan or a program.
When flexible training option is deactivated, a device can only
participate in the training with synchronized start session if it is
set to the same program or same training plan as the master
device.
Personnel:
n
Trainer
1.
Open the
“Setup”
menu tab.
ð
The
“Setup”
menu tab opens.
2.
Open the
“Synchronized start”
menu item.
3.
Set the current
“Synchronized start”
setting to
“YES”
“Settings in submenus” on page 58
.
4.
Set the current
“Master device”
setting to
“YES”
.
Steps to set up synchronized start
Overview of synchronized start set-
tings
Setting up the master device
Customization and setup
2021-07-28
miha-bodytec m.ove EMS training device
65