Mighty Seven DG-585, Руководство пользователя

Страница: 6 / 98

5
when changing accessories. Following this rule will
7) Do not place battery tools or their batteries
8) Do not crush, drop or damage the battery
pack. Do not use a battery pack or charger that
has been dropped or received a sharp blow.
Properly dispose of a dropped or damaged
battery immediately.
9)
Properly dispose of a dropped or damaged
battery immediately.
10)Batteries vent hydrogen gas and can explode
in the presence of a source of ignition, such
as a pilot light. To reduce the risk of serious
exploded battery can propel debris and
chemicals. If exposed to such debris or
area with water.
11)Do not charge a battery tool in a damp or wet
location. Following this rule will reduce the risk
of electric shock.
12)Under extreme usage or temperature
conditions, battery leakage may occur.
13)
If liquid contacts eyes, seek medical help.
irritation or burns.
14)If liquid comes in contact with your skin,
wash immediately with soap and water, then
15)If liquid from the battery gets in your eyes,
minutes, and then seek immediate medical
attention. Following this rule will reduce the
6.SERVICE
1)
repair person.
2) When servicing a power tool, use only identical
replacement parts.
3) Follow instructions in the Maintenance section of
this manual. Use of unauthorized parts or failure
to follow Maintenance instructions may create a
ADDITIONAL SAFETY
INSTRUCTIONS FOR GRINDING
OPERATIONS
1. Use only wheel types that are
recommended for your power tool and the
wheel. Wheels for which the power tool was
not designed cannot be adequately guarded
and are unsafe.
2. The grinding surface of centre depressed
wheels must be mounted below the plane
of the guard lip. An improperly mounted
wheel that projects through the plane of the
guard lip cannot be adequately protected.
3. The guard must be securely attached
to the power tool and positioned for
maximum safety, so the least amount of
wheel is exposed towards the operator.
The guard helps to protect the operator
from broken wheel fragments, accidental
contact with wheel and sparks that could
ignite clothing.
4. Wheels must be used only for
recommended applications. For example:
do not grind with the side of cut-off wheel.
Abrasive cut-off wheels are intended for
peripheral grinding, side forces applied to
these wheels may cause them to shatter.
that are of the correct size and shape
for your selected wheel. Proper wheel
the possibility of wheel breakage. Flanges
for cut-off wheels may be different from
grinding wheel flanges.
6. Do not use worn down wheels from larger
power tools. A wheel intended for a larger
power tool is not suitable for the higher speed
of a smaller tool and may burst.
SP
5