Mighty Seven DG-585, Руководство пользователя

Страница: 15 / 98

14
TROUBLESHOOTING
PROBLEM
CAUSE OF THE PROBLEM
SOLUTION
The motor stops
running
Battery is empty Charge the battery pack
The angle grinder
does not work
The switch is in the “ON”
position when attaching the
battery pack
Turn off the angle grinder first and
re-start the tool
The tool is running
slowly
The grinder wheel is worn out Replace the grinding wheel on the tool
TOOL MAINTENANCE
WARNING: Before any work on the
machine itself, remove the battery pack from
the angle grinder.
1. Inspect the screws periodically. If the
screw loosen, tighten them immediately, to
avoid serious accident.
2. Inspect tool cords periodically. If damaged,
have repaired at your nearest Authorized
Service Center.
3. Clean all parts of the tool; clean dust and
debris from vents. Keep the tool clean, dry
and free of oil or grease.
4. All service MUST only be performed by
Authorized Service Center. ALWAYS
use only accessories that are recommended
for this tool.
5. Avoid using solvents when cleaning plastic
parts. Most plastics are susceptible to damage
from various types of commercial solvents and
may be damaged by their use. Use clean cloths
and mild soap to remove dirt, dust, etc.
WARNING: Do not allow the water entering
the motor and the tool full immersed in the
ware, which will result in motor malfunction and
electric shock.
Store the batteries below 35 °C
Do not store batteries in high temperature or
high humidity environments.
It is recommended to store the batteries fully
charged.
ENVIRONMENT PROTECTION
1. Tool, accessories and packaging should be
sorted for environment-friendly recycling.
2. Power tools and accessories at the end of
their service life still contain large amounts of
valuable raw materials and plastics which can
likewise be fed back into a recycling process.
3. Some dust created by working contains
harmful chemicals must be collected by
special garbage re- cycle site.
SERVICE
1.
2. Warranty do not apply in case of normal wear,
overload or improper use of the tool.
In case of guarantee, repair or purchase of
replacement parts, always contact the qualified
service center.
And supplied with the efficient service card and
invoice.
14