Mighty Seven DG-585, Руководство пользователя

Страница: 14 / 98

13
• When using a new grinding disc, do not
move the disc in a forward direction on the
workpiece. Doing so will cause the edge of the
disc to cut into the surface of the workpiece.
While grinding, the direction of movement
should be backward, toward the operator
(FIG 7).
WARNING:
Sparks are generated
when grinding metal. Take care that no
combustible material presented in the area of
flying
sparks.
GENERAL MAINTENANCE
Using compressed air may be the most
effective cleaning method. Always wear
safety goggles when cleaning tools with
compressed air. Periodic maintenance
allows for long life and trouble-free operation.
A cleaning, lubrication and maintenance
schedule
should be maintained.
1. Avoid dropping or otherwise causing impact
to the tool and keep it from oil and grease.
2. Inspect the screws periodically. If the
screws loosen, tighten them immediately, to
avoid serious accident.
3. Clean all parts of the tool; clean dust and
debris from vents. Keep the tool clean, dry
and free of oil or grease.
4. Avoid using solvents when cleaning
plastic parts. Most plastics are susceptible
to damage from various types of commercial
solvents and may be damaged by their use.
Use clean cloths and mild soap to remove
dirt, dust, etc.
LUBRICATION
All of the bearings in this product are
lubricated with a sufficient amount of
high grade lubricant for the life of the
unit under normal operating conditions.
Therefore, no further lubrication is required.
STORAGE AND HANDLING OF
GRINDING WHEELS
When not in use, grinding wheels should
be stored carefully in a rack or box to
protect them from chipping or breakage.
All grinding wheels must be handled
carefully to prevent dropping and bumping.
OPERATION
MAINTENANCE
10°~ 15°
FIG. 7
13