Miele WWI 860 WPS, Руководство по эксплуатации, Страница: 96 / 112

Consumption data
96
Load Energy Water Duration Residual
moisture
°C kg kWh Litres h:min %
ECO 40-60 9,0 0,90 65 3:19 42
Cottons 60 °C 9.0 1.45 65 2:29 50
 * 9.0 0.74 54 2:59 44
20 °C 9.0 0.40 75 2:29 46
Minimum iron 30 °C 4.0 0.34 52 1:59 30
Express 20
1)
40 °C 3.5 0.33 30 0:20 –
Woollens

30 °C 2.0 0.23 35 0:39 –
QuickPowerWash 40 °C 4.0 0.58 40 0:49 –
1)
Short option activated
2)
Steam smoothing option deactivated
Consumption data can vary from the nominal values given depending on water
pressure, water hardness, water inlet temperature, room temperature, type and
volume of load, fluctuations in the electricity supply and any extras selected.
The consumption data shown in the Feedback display can vary from the
consumption data quoted here. The variations arise from component tolerances
and on-site conditions e.g. fluctuations in the pressure of the water supply,
mains voltage and fluctuations in the mains voltage.
Consumption data can vary from the nominal values given depending on water
pressure, water hardness, water inlet temperature, room temperature, type and
volume of load, fluctuations in the electricity supply and any extras selected.
TwinDos dispensing must be deactivated when carrying out comparison tests.
With the PowerWash washing technique, during the heating phase, the
temperature measured by the sensor in the suds container is higher than the
actual temperature of the laundry.
The temperature measured at the sensor
does not reflect the temperature of
the laundry.