manualshive.com logo in svg

Miele WWI 860 WPS, Руководство по эксплуатации, Страница: 69 / 112

Поделиться
Скачать
Miele WWI 860 WPS Скачать руководство пользователя страница 69

Problem solving guide

69

Fault message after a programme has been interrupted.

Issue

Cause and remedy

Drainage See 

The drain is blocked or restricted.
The drain hose has been fixed too high.

Clean the drain filter and the drain pump.

The maximum drain height is 1 m.

Water intake See

The water inlet is blocked or restricted.

Check whether the stopcock has been properly
opened.

Check whether the inlet hose is kinked.

Check whether there is sufficient water pressure.

The filter in the water inlet is blocked.

Clean the filter.

The drain pump is activated for 2 minutes. The washing
machine door is then released. Wait for the drain pump
to stop before switching the washing machine off.

Waterproof system.
Turn off  
Service

The water protection system has reacted.

Close the stopcock.

Call your Miele dealer.

 Service Fault F

There is a fault.

Disconnect the washing machine from the
electricity supply. Switch off at the wall and
withdraw the plug from the socket, or disconnect
the fuse.

Wait 

at least 2 minutes

 before reconnecting the

washing machine to the electricity supply.

Switch the washing machine on again.

Restart the programme. 
If the fault message appears again, contact your
Miele dealer.

To switch off the fault message: Turn the programme selector to the 

 position

and switch the washing machine off.

Содержание WWI 860 WPS

















































































































Отзывы:

Нет отзывов