Miele WWI 860 WPS Скачать руководство пользователя страница 70

Страница: 70 / 112

Problem solving guide

Fault message at the end of a programme

Issue

Cause and remedy



Check dosage

Excessive foam has built up during washing.



With TwinDos, check the dosage amount set.



Reduce the amount set in 10 % increments.



Use less detergent next time and follow the
manufacturer's instructions on dosage given on
the packaging.



Hygiene info: run a
programme at min.
75 °C or the “Clean
machine”
programme

When washing, a wash programme using a
temperature above 60 °C has not been run for a long
time.



Turn the programme selector to

Further

programmes





Touch the



sensor controls until

Maintenance

appears in the display.



Touch the

sensor control.

The following appears in the display:

Clean machine



Touch the

sensor control.



Run the

Clean machine

programme using Miele

machine cleaner or a universal powder detergent.

This will clean the washing machine and prevent a
build-up of bacteria and odours.

The messages will appear at the end of the programme and when the washing
machine is switched on and need to be confirmed with the

sensor control.

Содержание WWI 860 WPS

















































































































Результаты поиска

Содержание WWI 860 WPS

Отзывы:

Miele WWI 860 WPS, Руководство по эксплуатации, Страница: 70 / 112

Результаты поиска

Содержание WWI 860 WPS

Отзывы: