Miele WWI 860 WPS, Руководство по эксплуатации, Страница: 91 / 112

Installation
*INSTALLATION*
91
Connection to the water supply

Health risk and risk of damage
due to contaminated incoming water.
The quality of the incoming water
must correspond to the drinking
water specification of the country in
which the washing machine is being
operated.
Always connect the washing
machine to the mains water supply.

Risk of electric shock!
There are electrical wires in the water
inlet hose.
The inlet hose must not be
connected in an area subject to
spray water, e.g. in a bathroom or
shower room.
The washing machine should be
connected to the mains water supply in
accordance with current local and
national safety regulations. The German
authorities do not require it to have a
non-return valve as the washing
machine has been designed to comply
with DIN regulations.
The water-connection pressure needs
to be between 100 kPa and 1000 kPa. If
the water-connection pressure exceeds
1000 kPa, a pressure reducing valve
must be installed.
A stopcock with a ¾ inch threaded
union is required for the connection. If
this is not available, only a qualified
installer may connect the washing
machine to the mains water supply.
The connection point is subject to
mains water pressure.
Turn on the stopcock slowly and
check for leaks. Correct the position
of the washer and the threaded
union if necessary.
The washing machine is not suitable
for connection to a hot water supply.
The washing machine must not be
connected to a hot water supply.