Miele WWI 860 WPS, Руководство по эксплуатации, Страница: 67 / 112

Cleaning and care
67
Hygiene info
(Cleaning the drum)
Washing at low temperatures and/or
using liquid detergents can cause
bacteria and odours to build up in the
washing machine. Use the
Maintenance
wash programme to clean the washing
machine. Note the message in the
display:
Hygiene info: run a programme at min. 75 °C
or the “Clean machine” programme
Cleaning the water inlet filter
The washing machine has a filter to
protect the inlet valve. Check the filter in
the screw connection of the water inlet
hose approximately every 6 months.
Perform this check more often if there
are frequent interruptions to the external
water supply.
 First turn off the stopcock.
 Unscrew the inlet hose from the
stopcock.
 Remove the rubber seal 1 from the
recess.

Using combination or pointed pliers,
take hold of the plastic filter slat
2
and remove the plastic filter.
Reassemble in reverse order.
The filter must be put back in place
after cleaning.

Screw the screw connection securely
back onto the stopcock.

Open the stopcock.
Make sure there is no water leaking
from the threaded union.
Tighten the threaded union.