Miele TXI 680 WP Скачать руководство пользователя страница 91

Страница: 91 / 96

Settings

Display switch-off

To save energy, the display and
sensor buttons will go out after
10 minutes. The

Start/Add laundry

button flashes slowly. You can alter
this setting.

Options

(factory setting)

The display will go out (after
10 minutes):

– if a program is not selected after

the dryer has been switched on

– during the current program

– at the end of a program

On (not crnt prog)

The display will go out (as described
above) but will remain on while the
program is running.

Off

The display will remain on (i.e. it will
never go out).

You can switch the display back on by
touching any sensor button.

Memory

The dryer saves the settings that were
selected last for a drying program
(drying stage and/or extra option, or
the duration for some programs).

When the program is chosen again, the
saved settings will appear in the
display.

Options

Off

(default setting)

The activation of the delay start, the
buzzer, or the EcoFeedback data are
not saved.

Anti-Crease

The duration of the Anti-crease phase
can be altered.

Options

Off

(factory setting)

1 h

2 h

Содержание TXI 680 WP

































































































Результаты поиска

Содержание TXI 680 WP

Отзывы:

Бренды по названию

Популярные бренды

Miele TXI 680 WP, Руководство по эксплуатации

Результаты поиска

Содержание TXI 680 WP

Отзывы:

Бренды по названию

Популярные бренды