Miele TXI 680 WP Скачать руководство пользователя страница 33

Страница: 33 / 96

6. Program end – removing the laundry

End of program

The program is finished when

End/Anti-

Crease

End

appears in the display.

The

Start/Add laundry

sensor light goes

out.

Removing the laundry

Only open the door when the drying
process has finished. Otherwise, the
laundry will not be properly dried
through and cooled down.



Pull the door open at the side with
the orange marker.



Remove the laundry.

Items left in the dryer could be
damaged by overdrying when the
dryer is used the next time.
Always remove all items from the
drum.



Turn the program selector to the



position.



Remove the lint from the 2 lint filters
in the door opening: see “Cleaning
and care”, “Cleaning lint filters”.



Shut the door gently.



Empty the condensed water
container.

Useful tip:

The condensed water can

be used for the

SoftSteam

program.

See “Condensed water container –
Preparing the condensed water
container for the

SoftSteam

program”.

Drum lighting

The inside of the drum lights up so that
you don't forget any items of laundry
when you empty it.
The drum lighting will go out
automatically to save energy.

Содержание TXI 680 WP

































































































Результаты поиска

Содержание TXI 680 WP

Отзывы:

Похожие инструкции для TXI 680 WP

Бренды по названию

Популярные бренды

Miele TXI 680 WP, Руководство по эксплуатации

Результаты поиска

Содержание TXI 680 WP

Отзывы:

Похожие инструкции для TXI 680 WP

Бренды по названию

Популярные бренды