Frequently Asked Questions
56
With the help of the following guide, minor faults in the performance of the
machine, some of which may result from incorrect operation, can be remedied
without contacting the Service Department. This will save you time and money
because you won't need a service call.
This guide may help you find the reason for the fault and help you correct it.
Some of the messages in the display are more than one line long. Touch the
or
sensor button to read them in full.
The display indicates messages or faults
Message
Possible cause and solution
000
lights up after
switching on.
Access via a PIN code has been activated.
Enter the code and confirm the entry. Deactivate
the PIN code if you do not wish this message to
appear in the display the next time the machine is
switched on.
End/Cooling down
The laundry will be cooled down at the end of the
program.
Either remove the laundry and spread it out to cool
down or leave it in the tumble dryer to cool down
during the cooling phase.
Clean plinth filter.
See
lights up
at the end of a
program.
The tumble dryer is not working correctly or
economically. Possible causes could be clogging
caused by lint or detergent residue.
Please see “Cleaning and care” for notes on
cleaning.
Clean the lint filters.
Also check the plinth filter and clean it if
necessary.
To switch off the message: press
OK
.
You can influence when the
Clean plinth filter. See
message lights up.
To do this, follow the instructions in “Settings –
Airway indicator”.
Содержание TXI 680 WP
Страница 96: ...M Nr 11 677 010 01 en CA TXI 680 WP ...
