Buzzer
When the buzzer function has been
activated, an audible tone sounds at
the end of the programme.
Off
Factory default
The buzzer is switched off but sounds
at maximum volume if there is a fault.
Normal
The buzzer sounds at the end of the
programme.
Loud
The buzzer sounds more loudly at the
end of the programme.
Keypad tone
An audible tone sounds each time a
button is pressed.
Off
Factory default
On
Brightness
Contrast
You can adjust both the contrast and
the brightness of the display in steps.
The bars
P P P P P P P
show you the
setting.
You can see the change in the setting
as soon as it has been selected.
Display / Keypad illumination
To save energy, the display lighting
and the sensors are switched off and
the
Start
sensor flashes slowly.
The display and the sensors will always
go out
– if a programme is not selected within
10 minutes of the machine being
switched on.
– 10 minutes after the end of a
programme.
Pressing the
Start
sensor will switch on
the display and sensor lighting again.
Off after 10 minutes
The display and sensor lighting will go
out 10 minutes after the start of a
programme.
"On" whilst programme is running
Factory default
The display and the sensors remain
switched on during the course of the
programme.
Settings menu
68
Содержание T 8001 WP SUPERTRONIC
Страница 70: ...70 ...
Страница 71: ...71 ...
Страница 72: ...Alteration rights reserved 2112 M Nr 09 148 220 00 ...