To start a programme
^
Touch the green
Start
sensor.
G
Cottons
10:21
[
Normal - Extras (See
:
)
Time left: 2:03 h
Change
!
– The time remaining appears in the display.
– The current stage of the programme is represented by
symbols in the display.
Note on time remaining
The following factors all affect the estimated time remaining in
programmes with drying levels: residual moisture content
after spinning; type of fabric; size of load; room temperature;
fluctuations in power supply or cancellation of the
programme.
Because of these factors, the time displayed can alter during
the course of a programme. This is a normal function and
does not indicate a fault.
In the same way, programmes may finish early. This can
happen with particularly fine fabrics, very small loads or if
items were partly dry beforehand.
It is possible to alter a programme after it has started:
Changing a programme
You cannot change to another programme once a
programme has started (this prevents unintentional
alterations).
You will need to cancel the current programme before you
can select a new one.
Start at/Finish at: Changing the time
^
Touch the
Change
sensor.
^
Select the
Start at
or
Finish at
option in the menu.
^
Change the time of day by pressing either
+
or
-
.
^
Confirm the time you have set with
OK
.
3. Starting the programme
27
Содержание T 8001 WP SUPERTRONIC
Страница 70: ...70 ...
Страница 71: ...71 ...
Страница 72: ...Alteration rights reserved 2112 M Nr 09 148 220 00 ...