manualshive.com logo in svg

Miele SmartLine Tepan Yaki, Инструкции по эксплуатации и монтажу

Поделиться
Скачать
Miele SmartLine Tepan Yaki Скачать руководство пользователя страница 8

Warning and Safety instructions

8

Technical safety

 

Unauthorised installation, maintenance and repairs can cause

considerable danger for the user. Installation, maintenance and
repairs must only be carried out by your Miele dealer.

 

Damage to the Tepan Yaki can compromise your safety. Check it

for visible signs of damage. Do not use a damaged Tepan Yaki.

 

Temporary or permanent operation on an autonomous power

supply system or a power supply system that is not synchronised
with the mains power supply (e.g. island networks, back-up systems)
is possible. A prerequisite for operation is that the power supply
system complies with the specifications of EN 50160 or an
equivalent standard.
The function and operation of the protective measures provided in
the domestic electrical installation and in this Miele product must
also be maintained in isolated operation or in operation that is not
synchronised with the mains power supply, or these measures must
be replaced by equivalent measures in the installation. As described,
for example, in the current version of BS OHSAS 18001–2 ISO
45001.

 

The electrical safety of the Tepan Yaki can only be guaranteed

when correctly earthed. It is most important that this basic safety
requirement is present. If in doubt, the electrical installation should
be checked by a qualified electrician.

 

Before connecting the Tepan Yaki to the mains supply, ensure that

the connection data on the data plate (voltage and frequency) match
the mains electricity supply. This data must correspond in order to
avoid the risk of damage to the appliance. 
Compare this data before connecting the appliance. If in any doubt,
consult a qualified electrician.

 

Multi-socket adapters and extension leads do not guarantee the

required safety of the appliance (fire hazard). Do not use these to
connect the Tepan Yaki to the mains electricity supply.

Содержание SmartLine Tepan Yaki









































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды