manualshive.com logo in svg

Miele SmartLine Tepan Yaki, Инструкции по эксплуатации и монтажу

Поделиться
Скачать
Miele SmartLine Tepan Yaki Скачать руководство пользователя страница 29

Additional functions

29

Stop & Go

The set power level is reduced to 1
when the Stop & Go function is
activated.
The power levels and the timer settings
cannot be changed, the SmartLine
Element can only be switched off. The
minute minder and automatic switch-off
times continue to run.

If the function is deactivated, the
appliance switches back to the power
level that was set last.

If the function is not deactivated within
1 hour, the SmartLine element will
switch off.

Activating/Deactivating

Touch the 

 sensor control.

Recall

If the SmartLine element is accidentally
switched off during use, you can use
this function to restore all the settings.
The SmartLine element must be
switched on again within 10 seconds.

Switch the SmartLine element on
again.

The previously set power levels flash.

Press one of the flashing power level
indicators immediately.

The appliance will continue to operate
using the settings selected previously.

Содержание SmartLine Tepan Yaki









































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды