manualshive.com logo in svg

Miele SmartLine Tepan Yaki, Инструкции по эксплуатации и монтажу

Поделиться
Скачать
Miele SmartLine Tepan Yaki Скачать руководство пользователя страница 12

Warning and Safety instructions

12

 

When the Tepan Yaki is switched on either deliberately or by

mistake, or when there is residual heat present, there is the risk of
any metal items left on the Tepan Yaki heating up. Other materials
can melt or catch fire. Do not use the Tepan Yaki as a resting place
for anything. Always disconnect the Tepan Yaki from the power
supply when you have finished using it.

 

You could burn yourself on the hot Tepan Yaki. Protect your hands

with heat-resistant pot holders or gloves when using the Tepan Yaki.
Do not let them get wet or damp. Heat transfers through damp and
wet material more quickly with the risk of scalding or burning
yourself.

 

When using an electrical appliance, e.g. a hand-held food blender,

near the Tepan Yaki, ensure that the cable of the electrical appliance
cannot come into contact with the hot Tepan Yaki. This could
damage the cable insulation.

 

Placing hot pans on the sensors and indicators could damage the

electronics underneath. Do not place hot pans on the sensors or
indicators.

 

Because induction heating works extremely quickly, the

temperature could reach the flash point of oils and fats within a very
short time. Do not leave the Tepan Yaki unattended whilst it is being
used.

 

For people fitted with a heart pacemaker: please note that the

area immediately surrounding the Tepan Yaki is electromagnetically
charged when it is switched on. It is very unlikely to affect a
pacemaker. However, if in any doubt, consult the manufacturer of
the pacemaker or your doctor.

 

When switched on, the electromagnetic field of the Tepan Yaki

can impair the function of magnetisable objects. Do not leave credit
cards, digital storage devices, pocket calculators, etc. in the
immediate vicinity of the Tepan Yaki.

Содержание SmartLine Tepan Yaki









































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды